Cutting and Installing a Kitchen Backsplash

After quite a few set backs, I finally rented a small MK Diamond wet (tile) saw from The Home Depot after work on Thursday.  The price listed was $46 for 24 hours.  I chose to pay 10% of the rental cost, $4.60, for damage protection, which means that if I accidentally damaged the tile saw, I would not be billed for replacement.  With tax, the amount I owed for rental was $47.02.  However, a $100 deposit was needed, so I used my Home Depot credit card, the first credit card I got to afford our kitchen counter and pay it off over 6 months.

The smaller wet saw was perfect for me: it was less intimidating, possible for me to carry compared to the large rental, and could fit in the back seat of my brother's car.  I forgot to ask how to set up the tile saw while I was signing the rental contract, so when I got home I watched videos about tile saws.  Here are some I found most helpful:
Cut stainless steel fronted ceramic subway tile with a wet saw
After a few trial runs, I found folding my tile in half (along the mesh backing) and essentially doubling the layers was the best way for me to cut the thin tile.  I chose to set the subway pattern on the vertical, so I needed to cut off the staggered portion off one end.  If you have tile that is more than 6"x 6" without a mesh backing, I would recommend renting the larger MK Diamaond Saw.
Cutting 16 tile squares, including cutting out sections that would hug around the windows and outlets in our kitchen, took me about 3 hours from set-up to clean-up even with a steep learning curve.  Even so, paying for a 24 hour rental window was worthwhile, which included not feeling rushed while operating a spinning diamond blade for the first time.  =D  When I returned home on Friday, it was about 6:00 pm.  Instead of installing tile, I spent the rest of my Good Friday with my family.
On Day 2 - Saturday
On Day 2 - Saturday
I am not a professional tiler, so again, I recommend these videos for installation instructions:

I turned off the power at the circuit breaker and removed the outlet plates before adhering the tile to the walls.  I was weary of losing the screws, so I cut pieces of painter's tape to hold them in place.  I also later covered the outlets themselves with painter's tape to prevent adhesive from getting in the outlet holes.
We also had leftover Bulls-Eye tile spacers that I used for this installation.
As the tile were laid in a stagger pattern, I decided to cut the spacer into individual pieces.
I used a 1/8" trowel that we used in laying the granite and pebble tile in our bathroom.  I spread the mastic on the wall using the flat side, and then combed it at a 45 degree angle to create grooves to evenly disperse adhesive.  I used the dove-like cut spacers between the mesh sheets of tile.
I used a float, not the notched trowel, to apply even pressure to the tile faces.  It helps ensure that the tile is level and firmly pressing into the mastic on the wall.
After the bottom layer of square foot tile was adhered to the wall, I measured 15 3/4" up from the counter and marked where the tile should stop and the kitchen shelving should go.  I used my dad's old level, dust and all, a yardstick to check the level line for height accuracy, and then I carefully marked the lines with blue painter's tape.  Now, the area where the shelves will go will be clean of mastic and grout, but also, since the tape is about the same thickness as the shelves I'm building, it gives me a guide and visual of where the shelves will be.  :)
To check to make sure the shelves would allow clearance of a standard tall appliance, I borrowed the blender I purchased for my mom.  I did not install 3 of the tiles I cut with the wet saw because they required more detailed cuts for the other two outlets on the south window wall of our kitchen.  I'll use my new Dremel 3000 Rotary Tool for that.  :)
I had purchased only 20 sheets of tile, so to maximize my purchase, I used the remaining 4 sheets by cutting them into individual tiles or "buddy tile" for finishing the rest of the wall up to the shelf line.
As the sun started its descent into the horizon on Saturday before Easter, I laid the "buddy tile" and my tile with square "half" tiles on the counter with two spacers per group.  I wanted to ensure that everything would be ready to go once I returned to finish adhering the tile, spacers included.  :)


Logged work time:  ~ 5 hours (includes 2 hours to lay first course of "whole" tile)
Transportation time:  ~ 2 hours (to and from Home Depot to rent and return tile saw)
Dremel cuts and completing tile adhesion to the wall


On Day 1 - Good Friday Rental Return Day.

I used folding metal saw horses to create a stand for the wet saw, using scrap plywood as a top.
I went to work cutting straight edges on the side that would be placed parallel to the counter until I had little tile squares leftover for filling in the staggered pattern later.


Logged work time:  ~ 3 hours
Transportation time:  ~ 2 hours (to and from The Home Depot to rent and return)

4 comments:

  1. I have never attempted a back splash myself, yours is looking great.

    ReplyDelete
    Replies
    1. Thank you, Lois. :) I hope to finish all the steps by this Saturday.

      Delete
  2. Each year well-knοwn consultants in the Austria receiѵe
    more than $7 billion for theiг sегѵices.
    Mucch οf thіs money pays foг ԁpdgy ѕtatiѕtics and poorly ρгеpаred
    resourcе fo reviiew seгvices, locаl poliсy & procеԁure re-еvaluаtion.



    Our business moԁеl conceрt is fоcusseԁ in ensuгіng
    the sаfety and imprοveѕ ρracticе.
    We unԁertake a wide range of zoneѕ of actіvity, іnсluding
    RTF - ouг own unique framewoгk of гevіew.
    We, have greatly ехpеriеnced
    and talented directors offer a ωide variеtу
    оf specіal services to meеt cоmpanies many needs.


    We aand οur partner providеs yοu wih the research anԁ mathеmatics tools to grow your shаre of the Еuropean market.
    We hаvе integrated supoport that саn
    help you get your buѕinesѕ obbjectives through consulting
    οn ѕtrategic strаtegies, product develоpment, markеting programs and сhannels for distribution.



    A common obјectivе fοr а ѕtatisticаl reseаrch
    proϳеct is to identіfy causalitу, and in
    ρarticular to draw a actіonable conclusion оn the еffectof сhanges
    inthe valuеѕ of predictoгѕ or independent varriables
    on other variables or reѕponse. Τhere are two mаіn tyрes of cauѕal
    statiѕticаl studies: experimental stuԁy аnd observіng study.

    In both typeѕ of studies, the effеct of differencеѕ off an indeρenԁent
    variable (or vaгiables) onn the behаvіor of the dependent variable aгe obseгѵed.


    my sitе :: mencari dollar via internet

    ReplyDelete
  3. Eаch year management conѕultants iin the Ѕingaporе геceive more than
    $10 billion foг theіr sеrvices. Much of thіs money pays ffor shadoωy data and poorly prepared resouгce fο review serѵіces, cгedit rules & рrоcedure evaluation.


    Οur business model cοnceрt is focused in gurding and imρroving
    pгactice. We and our partners undertаkе a range of
    areas of activity, including P5F - our oωn unique framework of reviеw.
    We,hаνe gοoԁlу eхperіenced and talented
    consultantѕ оffer а wide variеty of consulting
    services to meet compаnіes many needs.


    Wе and our рartner proѵidеs you with the reѕеarсh and mathematics frameworms to
    grow your share of the glοbal marκet
    penetrаtiоn. We offer technical
    ѕupport that сan help уou achieve уour
    businеss goalѕ through consulting on strategic strategies, product
    devеlорment, markеting programs аnd chаnnels for distribution.


    A сommon objectiνe for a statisticаl research project
    is to іdentify causаlity, and in
    particular to ԁraω a conclusion on the effect of chаnges in the νalues οf predictors oг independent vaгiаbles on other vaгiables οr actionѕ.
    There aгe twο main types of cauѕаl statiѕtical studieѕ:
    eхpеrimental ѕtudies аnd observatiοnal
    studies. Ιn bοth tурes οf studies, the еffect off differencеѕ оf ann independent variablе (or varіаbles) on the
    behavior of the dependent variable aгe observed.


    Here is my weblog mencari dolar via internet

    ReplyDelete

Let's start a conversation. Seeing comments makes me want to do a jig. I love hearing from you, so please remember to leave your mark here. :)

Blogging tips